Ricoh 220-240 V Operating Instructions Manual page 30

2. Installing Options
4. Slowly insert the hard disk drive while aligning it with the top and bottom rails in the printer
until it stops.
2
5. Fasten the two screws to fix the hard disk drive.
• Use a coin or similar object if the screws do not turn easily.
• After finishing installation, you can check whether the hard disk drive is properly installed: Print the
configuration page from the [List/Test Print] menu. If it is installed properly, you will see "Hard Disk
Drive" for "Device Connection" on the configuration page.
• If the Hard disk drive is not installed properly, repeat the procedure from the start. If you cannot install
it properly even after reinstallation, contact your sales or service representative.
• "Printing the Test Page", Quick Installation Guide.
28
AUB216S
AUB217S