Ricoh 220-240 V Operating Instructions Manual page 177

5. Close the front cover.
• Once all misfed paper is removed, the error message will disappear and printing will continue.
Removing misfed paper from the fusing unit
If the error message is still displayed, check the inside of the fusing unit and remove any paper inside. Turn
off the power and wait for about an hour before turning it back on.
• Do not touch the metal part of the fusing unit. It becomes very hot. Touching it could result in a burn.
1. Open the paper exit cover.
Place your finger under the indentation in the exit cover, raise it ( ) and pull it backward to open it
( ).
AUB107S
AUB402S
Removing Misfed Paper
10
175