Ricoh 220-240 V Operating Instructions Manual page 144

8. Adjusting the Printer
6. Confirm the position of the image on the test sheet, and then adjust the registration value.
In this setting, adjust the margins of the test sheet so that they are equal in size.
7. In the [Registration] menu, press the [ ] or [ ] key to select [Adjustment], and then press
the [ Enter] key.
8. Press the [ ] or [ ] key to select the parameter you want to adjust, and then press the [
Enter] key.
8
9. Press the [ ] or [ ] key to set the registration value (mm), and then press the [
Increase the value to shift the print area in the positive direction, and decrease to shift in the negative
direction.
142
ZKEX480E
TS3X001N
Enter] key.