Erasing Received Documents - Canon Color imageRUNNER C3200 Sending Manual

3
Select the desired forwarding setting © press [Validate/
Invalidate].
[Validate]:
[Invalidate]:
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
To cancel forwarding, press [Validate/Invalidate] again.
The selected forwarding setting is enabled.
4
Press [Done] repeatedly until the Send Basic Features screen
appears.

Erasing Received Documents

You can erase any received document stored in the Memory RX Inboxes or the
Confidential Fax Inboxes when the memory is full.
NOTE
The memory is full when either of the following is true: (The actual numbers may be less
than that given below, depending on the conditions under which the hard disk is used.)
- When a total of 1,000 documents or images have been stored in all the inboxes
- When a total of 3,700 pages of documents or images have been stored in all the
inboxes
The received document is forwarded to the specified destination if
it matches the forwarding conditions.
The received document is not forwarded to the specified
destination even if it matches the forwarding conditions.
Receiving Print, Fax, and I-Fax Documents
6
6-19