Table of Contents
Advertisement
4
Press [Original Frame Erase].
5
Press [-] or [+] to set the frame erase width.
NOTE
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
•
You can change the values by pressing [-] or [+], even if you have entered the
values using
-
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default setting is '1/8" (4 mm)'. The maximum width that you can set for the
Original Frame Erase mode is '1 15/16" (50 mm)'.
G If you want to set the same width for all four borders:
❑
Press [-] or [+] to set the frame erase width © press [Next].
(numeric keys).
-
(numeric keys), and
Frame Erase
4-7
4
Advertisement
Table of Contents
