Table of Contents
Advertisement
4
4-22
Job Build
G If the original is two-sided:
❑
Press [2-Sided Original].
❑
Select the type of two-sided original © press [OK].
[Book Type]:
[Calendar Type]: The front and back sides of the original have opposite
Do not forget to set or cancel the 2-Sided Original mode, according to the
type of originals that you place next.
To cancel the 2-Sided Original mode, press [2-Sided Original] © [Cancel].
Repeat this step, if necessary.
IMPORTANT
If the original contains fine text or print, such as a map, the machine may need to
read or scan the document several times. Do not remove the original from the
platen glass until you are sure that the machine has finished scanning it.
NOTE
[2-Sided Original] is displayed only if the optional Feeder (DADF-K1) is attached.
The front and back sides of the original have the same
top-bottom orientation.
top-bottom orientations.
Advertisement
Table of Contents
