Welcome - Dimplex DGR32PLP Installation And User Manual

Welcome

Thank you and congratulations for choosing to purchase an Outdoor Infrared Propane Heater.
Please record your model and serial numbers for future reference. These can be found on the model and serial
number label on your heater.
Model
Serial Number
If you have questions regarding the operation of this product or if you require
Contact us at:  www.dimplex.com/customer_support
Please have your model number and product serial number ready.
MOD
Glen Dimplex Americas Ltd
1367 Industrial Rd , Cambridge,
ON, N3H 4W3, Canada
Outdoor Radiant Gas Heater
MODEL NO: DGR32PLP
TYPE OF GAS: Propane
TOTAL INPUT: 31,500 BTU/HR
GAS PRESSURE: 11 IN WC
5014095
Model and serial
Conforms to ANSI STD Z83.26-2014
Certified to CSA STD 2.37-2014
Gas-fired outdoor infrared patio heaters
number label
For outdoor use only. If Stored Indoors, Detach and
Leave Cylinder Outdoors. The gas supply must be
turned off at the LP-gas supply cylinder when this
appliance is not in use.
Minimum clearance to combustible materials: from
Top 20 inches(add TGHSHIELD 12 inches), Side 40
inches, Front 40 inches, Rear 12 inches.
WARNING: Improper installation, adjustment,
alteration, service or maintenance can cause injury
or property damage. Read the installation, operation
and maintenance instructions thoroughly before
installing or servicing this appliance.
(a)Do not store a spare LP-gas cylinder under or
near this appliance; (b)Never fill the cylinder beyond
80 percent full; If the information in (a) and (b) is not
followed exactly, a fire causing death or serious injury
may occur.
CAUTION: The gas pressure regulator provided with
this appliance must be used. This regulator is set for
an outlet pressure of 11 inches water column.
CAUTION: Hot while in operation. Do not touch.
keep children, clothing, furniture, gasoline and other
liquids having flammable vapors away.
Made in China
Serial No.
Lot No.
LIGHTING INSTRUCTION
IMPORTANT:
Protect appliance from wind during lighting and operation.
TURN ON THE HEATER
(1) Open the LP Gas Cylinder valve.
(2) Pull the trigger "ON" down, and a continuous "click"
sound will be heard.
(3) Once the flame is established, keep pulling the trigger
"ON" down for 10 seconds to ensure that the burner
remains lit.
(4) If the burner does not ignite, turn gas off at source, wait at
least 5 minutes for gas to clear, then retry. If your heater
still fails to light, turn gas source OFF. Refer to the
instruction manual "Lighting Your Heater Using A Match"
and "Trouble Shooting" for further information.
TURN OFF THE HEATER
Pull the trigger "OFF" down.
IMPORTANT:
When the heater is not in use, turn off the gas source.
Disconnect and remove the gas cylinder before storing this
gas heater indoors.
NO NEED TO RETURN TO THE STORE
service, before returning this product to the place of purchase,
For Troubleshooting and Technical Support
OR  Toll-Free 1-888-346-7539
3