Dimplex DGR32PLP Installation And User Manual page 12

Installation
1 1
Install the lower post
1. Insert 2 x hardware A into the 2 threaded
holes closest to the front of the base. Tighten
them half way.
2. Align the lower post over the 2 screws, and
secure the lower post to the base using
3 x hardware A.
3. Tighten all the screws.
A
2 2
Install the side panels
1. Position the two side panels onto the base.
2. Secure the left side panel to the lower post
using 2 x hardware A.
3. Secure the left side panel to the base using
3 x hardware A.
4. Repeat the same procedure for the right side
panel.
A
3 3
Install the heat deflector and battery
1. Secure the heat deflector to the head
assembly using 3 x hardware B.
2. Insert the battery in the battery compartment.
B
C
If installing optional heat shield DGRSHIELD
(sold separately):
3. Secure the DGRSHIELD to the included heat
deflector using the 4 bolts provided in the
accessory kit.
12
×5
×10
×3
Figure 4
A
×3
Figure 5
A
×6
Figure 6
C
B
×3
A
×2
A
×4
www.dimplex.com