OEL8000III Series
8. Tank Table (Strapping)
Tank Chart Points: Used to
create the chart for each
tank. (See Figure 8.1)
a) Tank Number: Selects a tank for setup.
b) Chart Increment: Used to calculate how many chart points are used for the chart.
Divide the tank diameter by the chart increment to get the number of chart points.
Enter the correct volume for each level given in the tank chart. It is recommended to
input at least 20 chart increment points for accuracy, based on that specific tank's
manufacturer's tank chart. Linear tanks can use 2 increment points.
Press the "NEXT PAGE" icon to continue programming parameters for the same tank.
OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779
Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com
File Name: DOC00007 rev1.1.docx 13 of 37 Rev Date: 12-14-2021
Programming Manual
Figure 8.1