Electrical Characteristics - AOC LCD Monitor P/N : 41A50-144 Service Manual

Parameter
PVDD
CVDD
Vin
Operating temperature
Storage temperature
Maximum power consumption
Parameter
PVDD
CVDD
Vil (COMS inputs)
Vil (TTL inputs)
Vih (COMS inputs)
Vih (TTL inputs)
Voh
Vol
Input Current
PVDD operating supply current
CVDD operating supply current
NOTE 1:5V-Tolerent TTL Input pads are as follows:
CRT Interface: HSYNC (pin #150), VSYNC (#148)
Host Interface: HFS (#98), HCLK (#103), HDATA (#99), RESETN (#100), MFB[11:0]: MFB11 (#123),
MFB10 (#124), MFB9 (#102), MFB8 (#104), MFB7 (#105), MFB6 (#106), MFB5 (#107), MFB4 (#109),
MFB3 (#110), MFB2 (#111), MFB1 (#112), MFB0 (#113)
OSD Interface: OSD_DATA3 (#121), OSD_DATA2 (#120), OSD_DATA1 (#119), OSD_DATA0 (#118),
OSD_FSW (#122)
Non-5V-Tolerant TTL Input Pad is: TCLK(#141)
NOTE 2: When the panel interface is disabled, the supply current is 0 mA. The drive current of each pad can be
programmed in the range of 2 mA to 20 mA (@capacitive loading = 10 pF)
NOTE 3: When all circuits are powered down and TCLK is stopped, the CVDD supply current becomes 0 mA.

3. ELECTRICAL CHARACTERISTICS

Table 20. Absolute Ratings
Min.
Vss-0.5 volt
0 degree C
-65 degree C
Table 21. DC Electrical Characteristic
Min.
3.15 volts
3.15 volts
0.7 * CVDD
2.0 volts
2.4 volts
-10 uA
0 mA
0 mA
Typ. Max.
5.6 volts
5.6 volts
Vcc+0.5V
70 degree C
150 degree C
~2W
Typ. Max.
3.3 volts 3.47 volts
3.3 volts 3.47 volts
0.3*CVDD
0.8 volts
1.1*CVDD
5.0+0.5 volts
CVDD
0.2 volts 0.4 volts
10 uA
20 mA/pad @ 10pF
500 mA
63
Note
Note
(1)
(2)
(3)