Safety ....................................1 National Conventions ..............................1 Power ..................................2 Installation ................................. 3 Cleaning ..................................4 Other ..................................5 Setup ....................................6 Contents in Box ................................. 6 Setup Stand & Base ..............................7 Adjusting the monitor ..............................8 Connecting the Monitor ............................. 9 Adaptive-Sync function ............................
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
Cleaning Clean the cabinet regularly with a water-dampened, soft cloth. When cleaning use a soft cotton or microfiber cloth. The cloth should be damp and almost dry, do not allow liquid into the case. Please disconnect the power cord before cleaning the product.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
USB Cable HDMI Cable Micphone Cable Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation. For use only with the attached power adapter Manufacturers: TPV ELECTRONICS (FUJIAN) CO.,LTD.
Adjusting the monitor For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor’s angle. You are able to adjust the monitor as below: NOTE: Do not touch the LCD screen when you change the angle.
Connecting the Monitor Cable Connections In Back of Monitor and Computer: 9 11 1. DC IN 2. USB UP 3. USB+fast charging 4. USB 3.2 Gen1 5. Microphone in 6. Earphone (Combined with Microphone) 7. HDMI1 8. HDMI2 9. DP IN1 10.
Adaptive-Sync function 1. Adaptive-Sync function is working with DP/HDMI 2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com • Radeon™ RX Vega series • Radeon™ RX 500 series • Radeon™ RX 400 series • Radeon™...
It is compatible with input signals in HDR10 format. The display may automatically activate the HDR function if the player and content are compatible. Please contact the device manufacturer and the content provider for information on the compatibility of your device and content. Please select “OFF” for the HDR function when you have no need for automatical activation function.
Adjusting Hotkeys Source / Up Dial Point / Down Game Mode / Left Light FX / Right Power / Menu / Enter Power/Menu/Enter Press the Power button to turn on the monitor. When there is no OSD, Press to display the OSD or confirm the selection. Press about 2 seconds to turn off the monitor. Dial Point/Down When there is no OSD, press Dial Point button to show / hide Dial Point.
OSD Setting Basic and simple instruction on the control keys. 1). Press the MENU-button to activate the OSD window. 2). OSD Lock/Unlock Function: To lock or unlock the OSD, press and hold the Down–button for 10s while OSD function is not active. Notes: 1).
Game Setting Game Setting Game Mode Shadow Control Game Color Adaptive-Sync Overdrive Low Input lag Frame Counter For playing FPS (first Person Shooters) games. Improves dark theme black level details. For playing RTS (Real Time Strategy). Improves the image quality. For playing Racing games.
Luminance Luminance Contrast Brightness Eco Mode Standard Gamma Gamma1 Contrast 0-100 Contrast from Digital-register. Brightness 0-100 Backlight Adjustment Standard Standard Mode Text Text Mode Internet Internet Mode Eco Mode Game Game Mode Movie Movie Mode Sports Sports Mode Reading Reading Mode Gamma1 Adjust to Gamma 1 Gamma...
Image Setup Image Setup HDR Mode Off / DisplayHDR / HDR Picture / HDR Movie / HDR Disable or Enable HDR Game Off / HDR Picture / HDR HDR Mode Disable or Enable HDR Mode Movie / HDR Game Note: When HDR is detected, the HDR option is displayed for adjustment;...
Color Setup Color Setup LowBlue Mode Color Temp. Warm DCB Mode DCB Demo Green Blue Off / Multimedia / LowBlue Mode Internet / Office / Decrease blue light wave by controlling color temperature. Reading Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM.
Audio Audio Volume DTS Sound Game TruVolume HD 200Hz 500Hz 2.5KHz 7KHz 10KHz Volume 0-100 Adjust volume setting Game / Rock / Classical / Select DTS Sound mode. DTS Sound Note: It may take up to 2 seconds to switch modes. Live / Theater / Off TruVolume HD On / Off...
Light FX Light FX Light FX Medium Light FX Mode Breathing Pattern Rainbow Foreground R Foreground G Foreground B Foreground R Foreground G Foreground B Light FX Off / Low / Medium / Strong Select the intensity of Light FX. Audio/Static/Simple Shift/Gradient Shift/Simple Filling/1 Way Filling/2 Light FX Mode...
Extra Extra Input Select Auto O Timer Image Ratio Wide DDC/CI Reset Resolution: 2560 H x 1440 V SDR H.Frequency: 89 KHz V.Frequency: 60 Hz Input Select AUTO/HDMI1/HDMI2/DP1/DP2 Select Input Signal Source Off Timer 0-24hrs Select DC off time Wide / 4:3 / 1:1 / 17"(4:3) / 19"(4:3) / 19"(5:4) / 19"W(16:10) / 21.5"W(16:9) Image Ratio Select image ratio for display.
OSD Setup OSD Setup Language English Timeout DP Capability 1.2/1.4 H. Position Transparence Break Reminder Language Select the OSD language Timeout 5-120 Adjust the OSD Timeout DP Capability 1.1/1.2/1.4 please be noted that only DP1.2/DP1.4 support Adaptive-Sync function H. Position 0-100 Adjust the horizontal position of OSD Transparence...
Press hot-key (AUTO) to auto-adjust. Please refer to Regulation & Service Information which is in the CD manual or www.aoc.com Regulation & Service (to find the model you purchase in your country and to find Regulation & Service Information...
Pin Assignments 19-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name TMDS Data 2+ TMDS Data 0- DDC/CEC Ground TMDS Data 2 Shield TMDS Clock + +5V Power TMDS Data 2- TMDS Clock Shield Hot Plug Detect TMDS Data 1+ TMDS Clock-...
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol.