JDE Sprso Giro Quick Start Manual

Cleaning the coffee brewer
The coffee brewer can be fully disassembled, but this is not required when executing the cleaning procedure.
This simplifies the overall procedure.
Brewer part names (these are mentioned in the text)



Cleaning procedure
Unlock the brewer: Press the
yellow release knob upwards.
Clean the brewer under a running
tap. Dry afterwards with a paper
towel.
NB. The brewer (parts) cannot be
cleaned in a dishwasher.
2021 - JDE Professional
1. Release knob (yellow)

2. Upper piston
3. Brewer chamber (with lower pistion inside)
4. Connection clip (geel)
5. Coffee tube

Take the brewer out of the
machine; Take out the right part
first (upper piston).
The yellow clip may be loosened
unintentionally. The clip can be
remounted as follows;
Sprso Giro
Troubleshooting
Slide the brewer chamber from
the axle, and take it out.
Guide the clip along the edge (on
the brewing chamber) as shown
here.