Electrical Panel Description - Riello RS 200/M BLU Installation, Use And Maintenance Instructions

4.11

Electrical panel description

1 Plug-socket on ionisation probe cable
2 Motor contact maker and thermal relay with reset button
3 A switch for: automatic-manual-off operation
A button for: output increase - decrease
4 Terminal board for electrical connection
5 Cable grommets for electrical wiring (to be carried out by the
installer)
6 Air pressure switch (differential type)
7 Sockets for electric connections
8 Ignition transformer
9 Control box base
10 Filter to protect against radio disturbance
11 Bracket to apply the RWF kit for modulating operation
20152093
Technical description of the burner
14 GB
20157899
Fig. 6