Configuring Data Logging Options; Calibrating The Om-Usb-5201 - Omega OM-USB-5201 User Manual

8 channel thermocouple input usb data acquisition module/data logger

Table of Contents

OM-USB-5201 User's Guide

Configuring data logging options

The following data logging configuration options are programmable with InstaCal.

select the input channels to log



set the data format



set the start mode



set up alarm conditions



copy and convert saved binary files



delete data files



All data logging options are stored on the OM-USB-5201 in non-volatile memory in EEPROM, and are loaded

on power up.

The OM-USB-5201 is fully calibrated with InstaCal. Calibration coefficients are stored in EEPROM. Allow the

OM-USB-5201 to operate for at least 30 minutes before calibrating.

Installing the OM-USB-5201

Table of Contents