Table of Contents
Advertisement
Shift Light
Shift Light
To actuate the Shift Light feature, press the
Shift Light button on the touchscreen, and then
press the Shift Light On button on the
touchscreen. Activation is shown on the
instrument cluster display. Pressing the Shift
Light RPM Set-Up button on the touchscreen
will take you to the Shift Light RPM Set-Up
screen.
NOTE:
The Shift Light feature is not available on
Scat Pack vehicles.
The only time the Shift Light comes on is
when the shifter is placed into the M (manual
shifting) position. You may use the shifter
+/-, or paddle shifters, to shift while in the M
position.
Shift Light RPM Set-Up
MULTIMEDIA
The Shift Light RPM Set-Up allows you to set the
shift light to actuate for gears 1, 2, 3, 4, and 5-8.
By pressing and releasing the Up/Down Arrow
buttons on the touchscreen above and below
each listed gear, the RPM values will change in
increments of 250 RPM. Pressing and holding
the arrows will change the RPM values in
increments of 500 RPM, ranging from
2000–6000 RPM (6.2L) and 2000–6250 RPM
(6.4L and 6.2L HO). The Shift Light Set-Up
screen may only be accessed if the feature is
enabled. Press the Reset to Factory Default
button on the touchscreen to change back to
factory settings, or press the Shift Light Off
button on the touchscreen to turn the system
off completely.
55
5
Advertisement
Table of Contents
