Magewell Ultra Encode User Manual, Reference And Faq page 51

51
Set AP
You device can work as an AP to be joined to for remote web control.
Disable: click to turn off AP mode. This renders you unable to manage the
■
device over AP, which is not recommended, especially when you are using
wireless network or linux/mac OS.
SSID: by default, it is named after the device serial number.
■
IP address: fixed as 192.168.48.1.
■
Subnet mask: fixed as 255.255.255.0.
■
Change password
■
AP password: the default AP password is the last 8-number of the serial
■
number. For example, a serial number A304210101001 indicates the
initial AP password is 10101001. It ranges from 8 to 16 characters
including A-Z, a-z, 0-9, space ._-+'[]() and cannot begin or end with a
space.
Set Mobile Network
The encoder supports streaming via a USB modem.
IP address: IP address assigned by the USB modem.
■
Subnet mask: subnet mask.
■
Network gateway: gateway.
■
DNS: DNS server IP address.
■