Table of Contents
Advertisement
30
The encoder can stream up to 6 RTMP/RTMPS servers simultaneously. The
■
recommended total bitrates for the streams is below 24Mbps for a wired
network connection, and 16Mbps for a wireless network connection.
RTSP
Name: specify a name for current task to facilitate server management,
■
which will be displayed in server list.
Port: specify RTSP stream port, the default port is 554.
■
Connections: set number of clients for each RTSP stream, 8 clients are
■
supported at most.
Main stream: turn on to push main stream. Specify parameters in
■
Parameters
tab.
Main key: specify key for main stream. The main key should be different
■
from sub key.
Sub stream: turn on to push sub stream. Specify parameters in
■
Parameters
tab.
Sub key: specify key for sub stream. The sub key should be different from
■
main key.
Audio: turn on to stream audio signal, otherwise audio will not be delivered.
■
The audio signal consists of audio embedded in input signal and LINE IN.
Save: save current configuration.
■
Only 1 RTSP streaming session can be started each time, but you can add
■
multiple servers to the streaming server list.
After configuration, the stream URLs display at the end of the page.
■
Encoding
Encoding
Advertisement
Table of Contents
