Magewell Ultra Encode User Manual, Reference And Faq page 31

31
SRT Caller
Name: specify a name for current task to facilitate server management,
■
which will be displayed in server list.
Stream: choose to stream main or sub stream, which can be customized in
■
Encoding Parameters tab.
Address: enter the Listener address when Mode is set to Caller. If the SRT
■
listener and caller are on the same LAN, enter the private IP address of the
SRT listener on the LAN. If the SRT listener and caller are in different network
environments, enter the public IP address of the SRT listener.
Port: enter the port number specified by the encoder, which ranges from 1
■
to 65535.
Connect timeout: specify SRT connection timeout in milliseconds, which
■
ranges from 1000 to 30000ms. The default value is 3000.
Retry duration: specify retry duration when SRT SRT connection timeout in
■
milliseconds, which ranges from 0 to 10000. The default value is 10000.
Latency: possible values are 30, 60, 120, 500, 1000, 5000, 8000ms. The
■
default value is 120. We recommend that you set the same latency for SRT
caller and listener.
Bandwidth: indicate the portion of the total bandwidth of a stream required
■
for the exchange of SRT control and recovery packets. Available values are
10%, 25%, 50%, 75%. A worse network condition requires more bandwidth
for overhead to ensure normal transmission.
MTU: specify maximum transmission unit (MTU) in bytes, ranging from 232
■
to 1500. The default size is 1496.