Robertshaw RS8210 Operation Manual page 5

1
LCD Screen
See page 4 for details about this
display read out.
2
Fan Switch
Select ON or AUTO. ON will run the
fan continuously. AUTO will cycle
the fan on only when the heating or
cooling system is running.
3
System Switch
Selects the operation mode on
your HVAC system. Selecting HEAT
turns on the heat mode. Selecting
COOL turns on the cool mode.
Selecting OFF turns both heating
and cooling off.
Caution:
When the battery icon
immediately. Failure to do so may result in your heating and cooling
system becoming inoperable. Freezing or overheating can occur.
THERMOSTAT OPERATION
Selecting EMH (for heat pumps
with auxiliary heat) will lockout the
compressor and control emergency/
auxiliary heat.
4
Temperature Setpoint Buttons
Press the + or - buttons to select the
desired room temperature.
5
User Buttons
Use these buttons to set up your
programming options. Refer to the
next page for detail.
appears replace your AAA batteries
3