Robertshaw RS8210 Operation Manual page 11

Filter Change
Feature
Reminder
Factory default
OFF
settings
This feature will
flash FILT in
the display after
the elapsed run
time to remind
Feature
the user to
Description
change the filter.
A setting of OFF
will disable this
feature.
LCD will show
Room Minimum
Temperature Compressor On
Calibration Time
0°F OFF
This feature This feature allows
allows the the installer to select
installer to the minimum
change the run time for the
calibration of the compressor. For
room example: A setting of
temperature 4 will force the
display. For compressor to
example, if run for at least 4
the thermostat minutes every time
reads 70°F and the compressor
you would like turns on, regardless
it to read 72°F of the room
then select +2. temperature.
Next Step Next Step
Prev Step Prev Step
Done Done
TECHNICIAN SETUP MENU
Compressor
Cooling
Short Cycle Differential or
Swing
Delay
On 0.5°F
The
The differential
compressor
setting often
short cycle
called cycle rate
delay protects
or anticipation is
the compressor
adjustable.
from short
A smaller
cycling. This
differential
feature will not
setting will cause
allow the
more frequent
compressor to
cycles and a
be turned on
larger differential
for 5 minutes
setting will cause
after if was last
fewer cycles.
turned off.
Next Step
Next Step
Prev Step Prev Step
Done
Done
Heating
Differential or
Swing
0.4°F
The
differential
setting, often
called cycle rate
or anticipation
is adjustable.
A smaller
differential setting
will cause more
frequent cycles
and a larger
differential setting
will cause fewer
cycles.
Next Step
Next Step
Prev Step
Prev Step
Done
Done
9