System Setting - Adesso NuScan 2100 Series Programming Manual

SYSTEM SETTING

6
Start of Configuration
RESET
• The reading of the "ABORT"
ABORT
• The scanner remains in the
RS-232C
PC/AT
USB
WAND EMULATION
SHOW VERSION
The reading of the "RESET"
label turns all the
parameters back to default
values.
When you intend to turn
your scanner back
default parameter, please
scans the "Start
configuration" label first,
then scan "RESET" label
label discards all the
parameters read prior to the
"End of configuration".
last interface mode when
the scanner is reset. The
label below should be
scanned if the scanner is
configured the first time.
The reading of the "SHOW
VERSION" label will be
show firmware version.
End of Configuration
7
to
of