Table of Contents
Advertisement
GENERAL
CONFIGURATION
8
Start of Configuration
SCANNING MODE SELECTION (for laser scanner)
For series laser scanners, there are 3 scanning modes to suit
your application requirements.
Trigger Mode
Pulse Mode
SCANNING MODE SELECTION (For CCD scanner)
The scanner becomes inactive as
soon as the data is transmitted. It
must be triggered to become
active again.
In auto scan mode, the scanner is
still
active
after
the
transmitted, but the successive
transmission of the same bar code
is not allowed when the trigger
switch is pressed again.
This scanner will light up when
press the scanner trigger switch
once. And, the scanner will turn
off for next pressing.
This mode is similar to Auto scan
mode, but double reading for the
same barcode is prohibited if the
scanner switch is pressed.
The scanner becomes inactive
as
soon
as
the
data
transmitted.
It
must
triggered to become active
again.
The scanner will light up when
press the pulse mode trigger
switch
once.
And,
scanner will turn off for next
pressing.
Trigger mode
data
is
Auto scan mode
Alternate mode
Repeat mode
End of Configuration
9
is
be
the
Hide quick links:
Advertisement
Table of Contents
