Advertisement
LoopStar
ADC's network interface devices for Ethernet and IP networks
Features
INTERFACES
EtherNID EE
Client
Network:
Monitor A/B Port:
EtherNID GE, MetroNID TE and MetroNID TE-R
Client/Network:
Monitor A/B port:
Management Port:
GPS Antenna Input
MetroNID TE-S
Client/ Network:
Monitor A/B port:
Management Port:
GPS Antenna Input
SERvICE ASSuRANCE FEATuRES
• Loopback functionality
– Layer 1, Layer 2 (MAC Swap), Layer 3 (IP Swap), Layer 4 (TCP/UDP Port Swap)
– Automatically reacts to in-band loopback requests sent from popular 3rd
party Ethernet test-sets, as well as 802.3ah / Y.1731 OAM loopback commands.
– Loopback on specific VLANs, source/destination MAC/IP address(es), Ethertype, protocol type, service class,
or any logical combination.
– Loopback on specific MAC/IP source and/or destination address
• Thru-traffic per-flow statistics
– Stats per VLAN, per Ethertype, per ToS, per CoS, per MAC, per IP, etc.
– Stores up to 7 days of local and remote historical packet statistics in user configurable history buckets
(typically set from 1-15 minutes).
– Monitor up to 60 concurrent flows on MetroNID TE-R, 16 flows on other units
• Dual Monitor Access Ports providing individual access to both signal directions, combined access to
both directions and intelligent filtering.
– Up to 100Mpbs of traffic can be monitored from each port
• Fast fault propagation <50 ms on all interfaces, client & network ports
• Transparent fail-over bypass on electrical-to-electrical models
• Dual protected uplink option for network side optical connection
• Link loss return
(1) 10/100Mbps (10/100 Base TX) RJ-45 Connectors: supports Auto-negotiation and Auto MDIX
(2) 100Mbps (100 Base FX/LX/SX/ZX/BX) SFP Connector: supports a wide range of SFPs
(3) 10/100/1000Mbps (10/100/1000 Base TX) RJ-45 Connectors: supports Auto-negotiation and Auto MDIX
(4)10/100/1000Mbps (10/100/1000 Base TX/FX/LX/SX) SFP Connectors: supports a wide range of SFPs including
copper SFPs
(5)Optional, available on MetroNID models only.
w w w . a d c . c o m
EtherNID™ – LoopStar
®
10/100Mbps, RJ-45
10/100Mbps, RJ-45
2 x 10/100Mbps RJ-45
Management port: 10/100Mbps, RJ-45
Mix & Match Assignable Ports for Client, Network and Monitoring Functions
– 2 x 10/100/1000Mbps RJ-45
– 2 x 10/100/1000Mbps SFP
Mix & Match with Client/Network Ports
10/100MBPS RJ-45
SMA Connector
(5)
Mix & Match Assignable Ports for Client, Network and Monitoring Functions
– 4 x 10/100/1000Mbps SFP
Mix & Match with Client/Network Ports
10/100MBPS RJ-45
SMA Connector
(5)
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
(1)
(1)
(1)
(1)
(3)
(4)
(1)
(4)
(1)
(5)
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
MetroNID™
®
)
6
Advertisement
