Optional Dc Power Supplies - Acnodes Panel PC 1000 User Manual

PANEL PC 1000 All-in-One PANEL PC User's Manual

Optional DC Power Supplies

(I) +12V DC Power Supply
Input Specifications
$" Input voltage range: +9V
Input current: 10A at +12V
$"
Output Specifications
$" Load Range:
Min. Load
Output
+5V
+12V
-12V
The output range of +12V, -12V and down with +5V setting.
At factory, all outputs in 60% rated load conditions, the
+5V output is set to between 4.95V and 5.05V, and the
other outputs are checked to be within the specified
voltage accuracy range.
$" Ripple and Noise:
The peak-to-peak ripple and noise for +5V output is less
than 50mV and less than 100mV for +/-12V outputs, both at
rated loads. Measuring is done by 15MHz bandwidth
limited oscilloscope and terminated each output with
0.47uF capacitor.
$" Line Regulation:
The line regulation for +5V output is less than +/-1%, for 12V
is less than +/-2%, for –12V is less than +/-3% while
measuring at rated loading and +/-10% of input voltage
changing.
Load Regulation:
$"
The load regulation for +5V, +12Vare less than +/-3%, for
-12V is less than +/-5%, measuring is done by changing the
measured output loading +/-40% from 60% rated load, and
keep other output at 60% rated load.
Power Supply Specifications
to +18V
DC DC
max.
DC
Rated Load
0A 10A
0A 1.5A (open)
0A 0.3A
Voltage Accuracy
4.95V to 5.05V
11.4V to12.6V
-11.4V to –12.6V
21