Fastbind Pureva XT User Manual page 17

Figure 10-x X
Figure 10-x X
Figure 10-x X
DRAFT
Hard coVer paper guIde
• It can be used with both soft and hard covers
• when binding a soft cover book, align the cover
• when binding a hard cover book, pull the
rougHenIng
• For roughening the roughener back and forth
• the book spine must be roughened before
• compress the spine back to shape after
applyIng glue
• glue is applied by moving heated hot glue
• repeat to apply more glue to the spine. avoid
• side gluing for soft cover books
• side gluing for hard cover books
Fastbind PUREVa Xt UsER manUal | v 1.0 | © maping Co 2014
17
horizontally against the paper guide.
spring loaded outer rim up and align the hard
cover against the inner rim. release the outer
rim to lock the hard cover down.
over the book spine when the table is in the
glueing position.
glueing.
roughening to form a square shaped book
spine.
o cautIon!
▪ do not use roughening after glue has
been applied to the book spine as glue
destroys the roughening parts!
cartridge back and forth over the book spine
using applicator handle. the glue roller located
on bottom of the glue cartridge spreads the glue
on the book spine.
applying too much glue.
o warnIng!
▪ the applied glue is hot! do not
toucH any Hot surFace at any
tIMe or you rIsk InJury
▪ do not touch the glue!
o pull 3 to 4 times from the cover after
gluing to put more glue between the cover
and the first page.
▪ After gluing, flip the spine stick on the
glued book spine to get a professional
finish.