Table of Contents
Advertisement
1| Safety
1.3
Intended use
•
These assembly instructions describe the standard version of the compressor named in the title
manufactured by Bock. Bock refrigerating compressors are intended for installation in a ma-
chine (within the EU according to the EU Directives 2006/42/EC Machinery Directive, 2014/68/
EU Pressure Equipment Directive, outside the EU according to the respective national regulations
and guidelines).
Commissioning is permissible only if the compressor has been installed in accordance with these as-
sembly instructions and the entire system into which it is integrated has been inspected and approved
in accordance with legal regulations.
The compressors are intended for use in refrigeration systems in compliance with the limits of
application.
Only the refrigerant specified in these instructions may be used.
Any other use of the compressor is prohibited!
1.4
Qualifications required of personnel
The compressor may not be used in potentially explosive
environments!
Inadequately qualified personnel poses the risk of accidents, the
consequence being serious or fatal injury. Work on compressors
is therefore reserved for personnel who are qualified to work on
pressurized refrigerant systems:
• For example, a refrigeration technician, refrigeration mechatronic
engineer. As well as professions with comparable training that enables
personnel to assemble, install, maintain and repair refrigeration and
air-conditioning systems. Personnel must be capable of assessing the
work to be carried out and recognizing any potential dangers.
US
5
Advertisement
Table of Contents
