Table of Contents
Advertisement
Acquiring GPS signals
When you turn on your navigation device, the GPS receiver must collect satellite data and establish the current
location. The time required to acquire satellite signals varies based on several factors, including how far you are
from the location where you last used your navigation device, whether you have a clear view of the sky, and how
long it has been since you last used your navigation device. The first time you turn on your navigation device, it
may take several minutes to acquire satellite signals.
1 Turn on the device.
2 Verify
appears in the status bar. Enable location services if it does not
Services, page
53).
3 If necessary, go to an open area with a clear view of the sky, away from tall buildings and trees.
appears at the top of the navigation map until the device determines your location.
Status bar icons
The status bar is located at the top of the main menu. The status bar icons display information about features
on the device. You can select some icons to change settings or view additional information.
Location services status. Indicates your location has been established.
Bluetooth
Wi‑Fi
signal strength.
®
Active vehicle profile.
Current time.
Battery charge level.
Tread app connection status
Using the Touchscreen
• Tap the screen to select an item.
• Drag or swipe your finger across the screen to pan or scroll.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.
Using the on-screen buttons
On-screen buttons allow you to navigate the pages, menus and menu options on your device.
• Select
to return to the previous menu screen.
• Hold
to quickly return to the main menu.
• Select
or
to scroll through lists or menus.
• Hold
or
to scroll faster.
• Select
to see a context-based menu of options for the current screen.
4
®
technology status.
(Pairing with Your Smartphone, page
(Enabling or Disabling Location
32).
Getting started
Advertisement
Table of Contents
Troubleshooting
