General Information Specification Description Machine Limitations Driving Stability Operating Instructions Before First Use Filling the Tank AquaTrans & AquaMove Operation Maintenance Periodic Checks Risk Assessment Warranty Warranty Policy What this Warranty Does Not Cover? How to Obtain Service Under this Warranty? Warranty Limitations w w w.tti.com.
Page 3
TTi recommends that if fluids other than water are to use used in the AquaTrans & AquaMove, the unit should be designated solely to that fluid, to avoid any risk of cross-contamination from different products.
8. The AquaTrans & AquaMove tank is a confined space. Ensure compliance with OH&S requirements if entering the tank. 9. Be aware of the height of the AquaTrans & AquaMove when mounted on a vehicle. Keep clear of overhead obstructions, such as bridges, low-hanging tree limbs and power lines.
It is essential the LiquidLocker system be used in tanks of 10,000 litres and above. 12. All hoses and pipes attached to the AquaTrans & AquaMove tanks must be flexible, to prevent damage due to vibration from pumps and motors. Rigid pipes must not be coupled directly to the tank.
It is available for fitting to 200 litre tanks and above. Steel Frames The 220 and 400 litre AquaTrans tanks are available with optional skid frames, fully welded steel and hot- dip galvanised for long-lasting protection.
Operating Instructions Before First Use Your AquaTrans & AquaMove tank is delivered fully assembled. Before use, it needs to be set up using the following instructions: • Complete the warranty registration online at www.tti.com.au/warranty-registration, or use the Warranty Registration Card at the back of this handbook.
CAUTION: The AquaTrans & AquaMove unit is designed for water and other benign fluid use only. It must not be used for harsh chemicals or fuel. The AquaTrans & AquaMove tank is filled by gravity from a supply, such as an overhead standpipe or supply hose as follows: •...
AquaTrans & AquaMove Operation The AquaTrans & AquaMove is supplied with an MBSP fitting at the base of the tank to connect to your discharge system. When so connected, the control of flow may be regulated by the discharge system.
AquaTrans™ & AquaMove™ Product HandBook Risk Assessment Task Hazard Risk Control Measure/Mitigation Ensure tank is Load not secured; Medium Read/follow decals on the tank mounted correctly overloaded vehicle; • Follow safe manual handling techniques; on vehicle and do not manual handling; slips, •...
AquaTrans™ & AquaMove™ Product HandBook Warranty Warranty Policy TTI will, at its option, repair or replace without charge any part covered by this warranty that is found to be defective in material and/or workmanship within twenty (20) years after the date of sale to the original retail purchaser.
Page 12
Scan to view our PDF Handbook online www.tti.com.au 1800 816 277 sa l e s@ tt i.c om.au P O B ox 1 37, N at ha li a , V I C , 3 63 8 M ur ray Va l l ey H w y, N ath a l i a , V I C 363 8 Quality Checked By: Proudly Built By: Signature...
Need help?
Do you have a question about the AquaTrans and is the answer not in the manual?
Questions and answers