Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Installation
To install the Venture IP Gateway, follow these steps:
1. Select a flat, well-ventilated space.
2. If you have 802.3af PoE, plug in your Ethernet cable to the LAN port and
the unit will power up.
3. If you don't have PoE, plug in the provided 48VDC/0.2A wall adaptor and
plug your Ethernet cable in to the LAN port.
The unit will power up.
4. Plug in your phone line(s).
Note: Plug an analog phone into the Bypass port to ensure your phone
connection is not interrupted in the event of a power failure. There is no dial
tone while the Venture IP Gateway has power.
The system LED turns red on start-up and changes to green when the
system is up and running.
Maintenance and Repair
The Venture IP Gateway is a field replaceable unit. There are no
user-serviceable parts inside the switch. For repairs, return the unit to
Aastra Technologies.
5 Model Venture IP Gateway Installation Guide
Advertisement
Table of Contents
