Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Phone Lines
The Venture IP Gateway has four phone lines numbered 1 through 4.
The RJ-11 cables connect to the telephone network through your
Service Provider.
Bypass Port
An analog telephone set can be plugged into the Bypass Port. In case of
power failure to the Gateway, the analog telephone becomes operational to
let you keep your connection to the telephone network. In the event of a
power failure Line 1 connects to the Bypass port internally.
Note: Please ensure a phone line is connected to Line 1.
LED
There are five LEDs on the front of the Venture IP Gateway. The left-most
LED is the system LED. It turns red on start-up and changes to green when
the system is up and running. The other four LEDs reflect the status of the
phone lines. If an LED is off, the line is not connected or unavailable. If an
LED is green, the line is connected and available. If an LED is flashing
green, the line is connected but in use.
Technical Specifications
Analog Ports
Network Ports
Music Input
Audio Output (Paging)
CODEC Options
Power
Certifications
Weight
Operating Temperature/
Humidity
Storage Temperature/
Humidity
4FXO Ports, 1 Emergency Bypass Port,
RJ11/RJ45 Plug Types
100 Base-T; RJ-45 Connector
Standard 3.5 mm stereo mini-jack
Standard 3.5 mm stereo mini-jack
G.711 PCM, G.723.1, G.729A
ETF 802.3af Power over Ethernet
48VDC/0.2A Wall plug (optional)
CSA C22.2 No.60950 NRTL/C,
FCC Part 15, Subpart B Class B,
TIA/EIA-968, ICES-003, CS-03
1.9 lbs (.8 kg)
32° F to 104° F (0° C to 40° C)
10% to 95% non condensing
14° F to 140° F (-10° C to 40° C)
5% to 90% non condensing
Model Venture IP Gateway Installation Guide
4
Advertisement
Table of Contents
