Power; Network Connections; External Paging; Music On Hold - Aastra Venture IP 480i Installation Manual

Hide thumbs Also See for Venture IP 480i:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
Figure 2: Venture IP Gateway Front View
L L
L
SYS
Figure 3: Venture IP Gateway Rear View
L L
L

Power

The Venture IP Gateway operates from an 802.3af Power over Ethernet
(PoE) unit or from the provided 48VDC/0.2A wall adaptor.

Network Connections

The Venture IP Gateway has two Ethernet connections: a LAN port and a
WAN port. Both use RJ-45 connectors. The LAN connects to the internal IP
network; the WAN port is for future use. Each port is 10/100Base-T.
Each port has two LEDs: a Link and Activity LED (left of the port) and a
Speed LED (right of the port). See Figure 3. The Link and Activity LED
indicates a link when lit solid green; it indicates activity when flashing green.
The Speed LED indicates 10Base-T when off; it indicates 100Base-T when
lit solid yellow.

External Paging

The Venture IP Gateway has an Audio Output jack for paging. It uses a
standard 3.5 mm stereo mini-jack. Ensure that the volume is set to 50%.

Music on Hold

The Venture IP Gateway has a Music Input jack for Music on Hold (MOH).
It uses a standard 3.5 mm stereo mini-jack. Ensure that the music source
volume is set to 50%.
3 Model Venture IP Gateway Installation Guide

Advertisement

Table of Contents
loading

Table of Contents