Table of Contents
Advertisement
en MicroCombi
Remove the worst of the food residues from the
2.
cooking compartment immediately.
Wipe away any moisture from the cooking compart-
3.
ment floor.
4.
Use the function selector to select .
Press
twice.
5.
is highlighted on the display.
a
Use the rotary selector to set a time of 15 minutes.
6.
Press
to start.
7.
a The drying process starts and ends after
15 minutes.
Open the appliance door for 1 to 2 minutes to allow
8.
the steam to escape.
9 MicroCombi
You can combine the microwave function with the grill
and steam function.
MicroCombi mode can be used with the following
functions:
Steam
¡
Full-surface grill
¡
Centre-area grill
¡
Exceptions:
Microwave output of 1000 watts
¡
9.1 Setting MicroCombi
Switch on microwave mode in addition to a type of
heating.
Set the function selector to a combinable type of
1.
heating.
a The display shows a default value.
Set the required steam setting or grill setting.
2.
To set the required microwave output setting, press
3.
.
a The display shows a default value for the cooking
time.
Use the rotary selector to set the cooking time.
4.
5.
Press
to start.
a The cooking time counts down and the operation
starts.
a You can see the cooking time counting down.
lights up.
a
10 Grill
You can brown or gratinate your food using the grill.
You can use the grill on its own or in combination with
the microwave.
10.1 Setting the grill
Set the function selector to
1.
Set a grill setting using the rotary selector.
2.
a The display shows the grill setting.
3.
Use the rotary selector to set the required cooking
time.
Press
to start.
4.
16
or
.
8.11 Drying the cooking compartment by
hand
Always dry the cooking compartment after operation to
ensure that no moisture remains.
Allow the appliance to cool down.
1.
Remove the worst of the food residues from the
2.
cooking compartment.
Dry the cooking compartment with a sponge.
3.
Leave the appliance door open for 1 hour so that
4.
the cooking compartment dries completely.
a Once the cooking time has elapsed, the appliance
stops the operation and a signal sounds.
9.2 Changing the microwave output setting
Press
until the required setting is selected on the
▶
display.
Note: Touching it several times switches the output set-
tings from the highest to the lowest level.
If the microwave function is only added after starting,
the appliance pauses. Press
9.3 Pausing the operation
Press
or open the appliance door.
1.
a The appliance stops the operation.
a
flashes.
Close the appliance door.
2.
Press
.
3.
a The appliance continues the operation.
lights up.
a
9.4 Stopping operation
You can stop operation at any time.
Turn the function selector to the off position.
▶
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
a The appliance starts heating. Once the appliance
has heated up, slight fluctuations in temperature are
normal.
a The temperature display lights up completely.
Note: When the time has elapsed, a signal sounds.
Grill functions
You can choose between two different grill functions,
depending on the type and amount of food:
to start.
Advertisement
Table of Contents
