Cleaning And Maintenance - Westinghouse WSFDAN1201SV Instruction Manual

CLEANING AND MAINTENANCE

DANGER OF ELECTROCUTION! Before cleaning, always unplug
the appliance from the wall socket.
WARNING! To avoid electrical hazards, never immerse the
appliance, power cord or plug in water or any other liquids. Never
rinse them under the tap. Keep all electrical parts dry.
NOTE: Never use solvents, chemical or abrasive cleaning agents,
wire brushes, sharp objects or scouring pads to clean the
appliance.
• Make sure that water does not get into the motor while
cleaning.
• General cleaning – To remove dirt and dust, wipe down the
exterior of the appliance with a soft cloth/sponge moistened
with water or mild soapy water. Dry the appliance completely
after cleaning.
Thorough cleaning – To clean dust accumulated in the fan
•
blades and guards, follow these steps:
- Disassemble the fan head (1) by following the steps in the
"HEAD ASSEMBLY" section in the reverse order.
- Wipe the motor unit (14) with a soft cloth moistened with
water or mild soapy water. Dry well.
- Clean the front guard (10), rear guard (12) and fan blades (11)
in mild soapy water with a soft cloth/sponge. Rinse well and
dry with a soft cloth. Allow all parts to dry completely before
reassembling them onto the motor unit.
EN
11