Cleaning And Maintenance; Replacing The Fuse - Westinghouse WFS16 Series User Manual

SET UP & USE SET UP & USE

CLEANING AND MAINTENANCE

• Before cleaning and assembling, unplug the fan.
• Plastic parts of the fan should be cleaned with mild soap and a damp cloth or
sponge. Rinse with clean water to remove any soapy film residue.
• Be sure not to get water or any other liquid inside the motor.

REPLACING THE FUSE

• Disconnect fan from power outlet by grabbing the plug
at the end of the cord. Do not unplug by pulling the
cord itself
• Open fuse cover located in the side of the power cord
plug by sliding it toward the plug blades (Fig 10.)
• Remove fuse carefully by taking a small tool and slowly
prying out one end. Once you have one end out, slowly
pry out the other end.
• To avoid the risk of fire, replace only with similar 2.5 Amp, 125V fuse.
• Close fuse cover by sliding cover toward the top of the plug.
CAUTION: Do not attempt to replace the plug itself. Discard the product entirely if
the plug itself is damaged.
Page 8
Fig. 10