Cleaning And Maintenance - Westinghouse WSFDHABK Instruction Manual

Speed
1 Low
2 Mid
3 High
4 Turbo
Note:
• When the fan is in normal mode, there won't be any indicator
light.
• When the fan is not in use for 15 seconds. The indicator light
will dim by half.
• Disconnect the fan from power supply when it will not be in use
over an extended period.
Replace the remote control battery
When the remote control buttons do not respond properly, the
battery may have run out. Replace with a new 3V Lithium battery
(Model: CR2032).

CLEANING AND MAINTENANCE

• Always turn off and unplug the fan before cleaning.
• Use only a soft, damp cloth to gently wipe the outer surfaces of
the fan clean.
• To clean between the grilles, we recommend using a pipe
cleaner, flexible dust wand, vacuum cleaner or compressed air
to gently remove the dust.
• DO NOT immerse the fan in water and never allow water to drip
into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean
the fan.
• When storing, you may leave the fan assembled and covered to
protect it from dust. Store the fan in a cool, dry, place.
WSFCHABK_9 Oscillating Table Fan_2L.indd 11
HOW TO USE
Mode
When the fan Normal
is turned on
Natural
Sleep
Timer
1H 1 hour
2H 2 hours
4H 4 hours
9/12/2019 15:33:02
EN
11