Lumens VC-A50PN Installation Manual

Camera Installation Guide
Please read all instructions prior to attempting your NDI
current Microsoft Windows
Download & install the NDI
• Follow this link to download your NDI
website.
http://new.tk/NDIHX-Driver-Win
• Install the driver on your Windows
Note: This will also install NewTek NDI
Connect VC-A50PN with NDI
• With the NDI ®
|HX driver installed on your Windows
both your Windows
same local network via standard Ethernet cable.
If you are using a switch (without a router), you may need to manually
configure the network settings on your Windows
• From your Windows
Monitor application (installed with your NDI® |HX driver) to finish the process.
• Click the menu icon in the upper-left corner to view all the available NDI
sources, then locate and select your camera.
IMPORTANT: Your camera must be connected to the same local network as
®
the Windows
VC-A50PN
®
computer or device is required to complete the upgrade process.
® |
HX driver
®
®
|HX
®
device and camera are powered and connected to the
®
computer or device, open the NewTek NDI
computer or device with your NDI
®
|
HX camera. Be advised that a
® |
HX driver from the NewTek
®
device.
Studio Monitor
®
device, ensure that
®
computer or device.
®
|HX driver installed to proceed.
1
®
Studio
®