Storage Drives; Installing Drives - Supermicro SuperBlade SBA-4114S-C2N User Manual

2.8 Storage Drives

The blade has two 2.5" hot-swap storage drive bays. The drives are mounted in tool-less
drive carriers that simplify their removal from the chassis. These carriers also help promote
proper airflow. Carriers without drives must remain in the chassis for proper airflow.
Note: Enterprise level storage drives are recommended for use in Supermicro systems. For
information on recommended drives, visit the Supermicro

Installing Drives

Removing a Hot-Swap Drive Carrier from the Chassis
1. Press the release button on the drive carrier, which will extend the drive carrier handle.
2. Use the drive carrier handle to pull the drive out of the chassis.
Figure 2-15. Logical Drive Numbers
Figure 2-16. Removing a Drive Carrier
32
Chapter 2: Installation and Setup
website.
1
0
2
1