Table of Contents
Advertisement
2.2 Installing or Removing the Blade Unit
Installing a Blade Unit into the Enclosure
1. Pull the latch lever out, and push the blade into its bay. Caution: Insert the blade
carefully so the rear connectors are not damaged.
2. As the blade is seated in the enclosure, push the lever into its locked position.
Removing a Blade Unit from the Enclosure
A blade can be removed from the enclosure while other blades continue to operate.
Note: When a blade is removed for a length of time, cover the slot with a dummy to ensure
proper airflow in the enclosure.
Removing a Blade Unit from the Enclosure
1. Power down the blade unit.
2. Pull open the latch lever and use it to pull the blade from the enclosure.
Latch Lever
Figure 2-1. Blade Latch Lever
17
Chapter 2: Installation and Setup
Advertisement
Table of Contents
Troubleshooting
