Table of Contents
Advertisement
Title
Identifier
Language
Description
Version
Revision
Changes
Status
Last Modified
Author
Charging the Device
To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or
connecting to a computer.
The device is powered by a built-in lithium-ion battery that you can charge using a standard wall outlet or a USB
port on your computer.
NOTE: The device will not charge when outside the approved temperature range
page
117).
1 Pull up the weather cap
2 Plug the small end of the USB cable into the USB port on the device.
3 Plug the large end of the USB cable into an AC adapter or a computer USB port.
4 Plug the AC adapter into a standard wall outlet.
When you connect the device to a power source, the device turns on.
5 Charge the device completely.
After you charge the device, close the weather cap.
Introduction
Charging the Device (generic bike)
GUID-CE71E601-BA73-4807-8D30-84EDCC1CCBBA
EN-US
4
5
Added a post req. from product support about closing the weather cap.
Released
27/06/2018 12:45:01
cozmyer
NOTICE
from the USB port
.
(Edge Specifications,
7
Advertisement
Table of Contents
