Removing A Driver From Netware - 3Com 3C971-F ATMLINK User Manual

2 Find the last BIND IPX command for the 3C971-F
adapter in the AUTOEXEC.NCF file.
If Channel 2 is the last channel configuration, the last
Bind command should be similar to the following:
bind ipx 3C971FSI_2 net=random_8_digits
3 Insert the following command in the line
immediately following the last BIND IPX
command:
load asig
4 Save and exit the AUTOEXEC.NCF file.
5 Exit the NetWare INSTALL utility.
6 Reboot the server.
The installation of the 3C971-F adapter driver is
complete.

Removing a Driver from NetWare

To remove a driver from the AUTOEXEC.NCF file,
follow these steps:
1 From the system prompt, enter the command:
load install
The Installation Options dialog box appears, as
shown in Figure 4-18.
Removing a Driver from NetWare 4-15