Advertisement
Find the Correct Serial Port
In the streaming data logger's Setup menu, click Communications Port Settings.
Select the correct COM port and baud rate to communicate to the streaming data
logger. The correct baud rate will be the one set in your console, and in
WeatherLink. The default value is 19,200 baud. You may manually set the COM
port setting or use the Auto Detect button to automatically find where your
streaming data logger is connected.
Note:
Using the Auto Detect command can help you locate the serial port. Use the
Loopback connector and WeatherLink software to help you determine whether the
serial port is functioning. Consult the WeatherLink for Vantage Pro2 Getting Started
Guide and on-line Help files for more information.
Consult your TNC modem and ham radio documentation to determine how to
configure your streaming data logger to communicate APRS data to your ham
radio.
2
Advertisement
