DAVIS WeatherLink 6540 User Manual page 5

For vantage pro2 , vantage pro2 plus , vantage vue and weather envoy

Configure the Streaming Data Logger

In the streaming data logger's Setup menu, click Configure Streaming Data

Logger.

Time Out Period

Normally, the streaming data logger will stream an ASCII character string

according to the Transmission Rate setting to the ham radio TNC modem.

However, the streaming data logger utilizes a time-out period for ceasing

streaming whenever software attempts to communicate to the logger. The default

setting is 5 seconds. You may adjust this value if you wish streaming to resume

sooner or later after communicating to the logger using WeatherLink or the

Streaming Data Utility.

Note:

Once communications to WeatherLink are initiated and successful, the streaming

data logger will be unable to communicate with the Streaming Data Utility until the

Time Out Period expires. If you need to communicate to the logger with both the

Streaming Data Utility and WeatherLink, you should communicate using the

Streaming Data Utility first.

APRS Baud Rate

Use this setting to determine what baud rate to send APRS data to the TNC modem

on your ham radio. The default value is 9600.