Advertisement
Quick Links
Atlas - Internal 3 Drawer Chest
Assembly Instructions -
Dimensions
Width - 47cm
Depth - 50cm
Height - 75cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Please keep for future reference
161/5803
MADE IN
BRITAIN
Issue 3 - 19/03/14
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argos Atlas 161/5803
Summary of Contents for Argos Atlas 161/5803
- Page 1 Atlas - Internal 3 Drawer Chest Assembly Instructions - 161/5803 Please keep for future reference Dimensions Width - 47cm Depth - 50cm MADE IN Height - 75cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 3 - 19/03/14...
-
Page 2: Care And Maintenance
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 19kgs. space to layout the parts before recommend the Please lift with care. starting. - Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side (D2385A) (D2766A) (D2384A) (735 x 495mm) (735 x 495mm) (496 x 468mm) Drawer Front...
-
Page 4: Tools Required
If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. - Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the drawer fronts Screw 2 metal dowels into the holes shown on the back of the drawer fronts Note: Tighten the metal dowels up fully against...
- Page 6 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer backs Fit the drawer back . between the drawer sides Make sure that the drawer base...
- Page 7 Assembly Instructions Step 7 Fit the wedgefixes Slide 1 wedgefix into the small groove located on the back of the drawer front and 1 into the small groove in the drawer back Once in place, tighten up the screws in the wedgefixes Step 8 Prepare the top...
- Page 8 Assembly Instructions Step 9 Prepare the left side Fit runners screw screw screw the left side The 1st screw uses the 2nd hole in from the front of the runner. The 2nd and 3rd screws use the holes that line up with the other panel holes.
- Page 9 Assembly Instructions Step 10 screw screw screw Prepare the right side Fit runner to the right side The 1st screw uses the 2nd hole in from the front of the runner. The 2nd and 3rd screws use the holes that line up with the other panel holes.
- Page 10 Assembly Instructions Step 11 Fit the top Push the top onto the right side Use a screwdriver to tighten the 2 large locking nuts fitted to the right side Note: Turn the large locking nuts as far as Plain Finished they will go - more than chipboard front edge...
- Page 11 Assembly Instructions Step 13 Fit the 4 plastic nails Tap 2 plastic nails into the bottom edge of each of the sides...
- Page 12 2 people may be required for this. If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW ALR2958...
Need help?
Do you have a question about the Atlas 161/5803 and is the answer not in the manual?
Questions and answers