DISASSEMBLY AND REASSEMBLY
Remove the CRT PWB, degaussing coil connector G and front power switch remote control PWB. Place
the main PWB upright.
Reconnect the CRT PWB. Put the main PWB and the VCR unit together as shown below. Keep the front
power switch remote control PWB, speakers and degaussing coil connector G off position.
n
SERVICING THE PWBs
<Repairing the TV unit>
Unhook the power PWB and place it on the left
hand of the set. Set up the mother PWB as shown
below.
-Mother PWB
FRONT
(Continued)
<Repairing the TV and VCR units>
Unhook the PWB/mechanism assembly from the
VCR unit, and place it as shown here. Connect the
cables (AB), (AD) and (PC) to the mother PWB to
start repairing.
TV Unit