Sharp VT-3428X Service Manual page 25

Video tv
Hide thumbs Also See for VT-3428X:
Table of Contents

Advertisement

CHECKING THE FAST FORWARD BACK
TENSION
Remove the cassette housing control assembly.
l
Make a short-circuit between TP8804 and
l
on the VCR PWB, with a 22 ohm resistor. Now
turn on the power.
Checking
l
I. Push the FF button to place the ass'y in the
fast forward mode.
disk, and turn it clockwise very slowly (one
rotation every 2 to 3 seconds) and check that
the torque is I .5 * 0.9mN.m (I 5 + 9gfcm).
Torque gauge
Supply reel disk
Figure l-1 2.
Note:
disk. If the torque gauge is not securely set on
the reel disk, measurement will be incorrect.
weight exerted on the reel disk.
CHECKING THE REWIND BACK TENSION
Remove the cassette housing control assembly.
l
Make a short-circuit between TP8804 and
l
on the VCR PWB, with a 22 ohm resistor. Now
turn on the power.
Checking
l
I. Push the REW buton to place the ass'y in the
rewind mode.
Torque gauge
Take-up reel disk
Note:
@Set the torque gauge securely on the take-up
CHECKING THE VIDEO SEARCH REVERSE
BACK TENSION
Note:
, /
CHECKING THE PINCH ROLLER PRESSURE
l
l
l
disk, and turn it counterclockwise very slowly
(one rotation every 2 to 3 seconds) and check
that the torque is I .3 2 0.8mNem (I 3 + 8
reel disk. If it is not secure, the measurement will
be incorrect.
weight exerted on the reel disk.
Remove the cassette housing control assembly.
Make a short-circuit between TP8804 and
on the VCR PWB, with a 22 ohm resistor. Now
turn on the power.
Checking
Push the PLAY button to place the ass'y in the
playback mode.
Push the rewind button to place the ass'y in the
video search reverse mode.
Place the torque gauge on the take-up reel disk,
and turn it counterclockwise very slowly (one
rotation every 2 to 3 seconds) and check that the
torque is within the set value 4 f 1.7mNam
Torque gauge
Take-up reel disk
reel disk. If it is not secure, the measurement will
be incorrect.
weight not exerted on the reel disk.
Remove the cassette housing control assembly.
Make a short-circuit between TP8804 and
on the VCR PWB, with a 22 ohm resistor. Now
turn on the power.
Checking
Push the PLAY button to place the ass'y in the
playback mode.
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt-5128x

Table of Contents