Table of Contents
Advertisement
Jig Item
No.
Special Bladed Screwdriver
Torque Driver
Box Driver
Reverse Guide Height
Adjusting Jig
Configuration
Part No. Code
AS
C
:
Remarks
This screwdriver is used for adjusting
the guide roller height.
This is used to screw down resin-
made parts: the specified torque is 5
This Jig is used for height adjust-
position.
This Jig is used for replacement of
the SI roller.
This Jig is used for height adjust-
ment of the reverse guide.
This Jig is used for height adjust-
Advertisement
Table of Contents
