Sharp VT-3428X Service Manual page 34

ASSEMBLE THE MECHANISM'S PARTS
REQUIRING THE PHASE MATCHING IN THE
STEPS BELOW.
, Assembling the pinch roller assembly and the
I
pinch drive cam (on the front of the mechanism
chassis).
mechanism chassis).
mechanism chassis).
loading motor assemblies (on the back of the
mechanism chassis).
and the pinch drive cam (on the front of
the mechanism chassis).
Place the following parts in position in numerical
order.
Figure l-47.
Fit the point of the pinch drive cam to the
fourth tooth of the pinch drive lever,and
insert the pinch drive cam.
Fit the pinch drive cam's hollow part and the
pinch drive lever's hollow part to
chassis position.
Phase Matching Point 1
Figure 148-l.
Pinch Drive Cam
Pinch Drive Cam