Table of Contents
Advertisement
brake and loading motor assemblies
(on the back of the mechanism chassis).
Note:
Before setting up the loading motor, make sure the
phase is matched. To do so, turn the connection
gear clockwise and check to see if the loading is
complete and if the pinch roller comes into contact.
Note:
Let the slow brake leg out of the front of the
mechanism chassis. Catch the spring to the take-
up fixing guide that is at the left of the A/C head.
Brake
Figure l-52.
When these actions are made smoothly, return the
mechanism to the state as shown above. Finally
mount the loading motor unit.
Advertisement
Table of Contents
