Snorkel S1930E Operator's Manual page 50

Chapter 10 – Stowing and Transporting
2. Remove all personnel, tools, materials, or other loose
objects from the platform.
3. Properly stow the aerial platform.
4. Place wood blocks under the front ends of the pothole
protection skids to limit excessive loading on the front
drive wheel bearings.
5. Place the lower controls emergency stop switch in
the off position.
6. Turn the battery disconnect switch off.
Caution
Ratchets, winches, and come-alongs can produce
enough force to damage machine components. Do
not over tighten the straps or chains when securing
the aerial platform to the transport vehicle.
7. Use chains or straps to securely fasten the aerial plat-
form to the transport vehicle using the front and rear
tie-down lugs as attachment points. Proper tie-down
and hauling is the responsibility of the carrier.
46 S1930E/S1932E/S2632E – 1360460