Shutting Down The Server - Hologic Cenova Image Analytics Server 3.0 User Manual

Cenova Server IP Address: ________________________________
Note
Use these procedures when DICOM 6000 Interface is installed on a Cenova server.
3.3.1

Shutting Down the Server

You might need to shut down the Cenova server if you are going to move the computer,
or if you know the power is going out for a period of time.
Important
If you shut down the server from a remote location, be aware that in order to switch the
server back on, you will need to have physical access to the server.
To shut down the server:
1.
2.
3.
4.
MAN-05463-001 Revision 002
Using a computer that is on the same network as the server, open a web browser (for
example, Internet Explorer).
Type the IP address for the server in the address box and press [Enter]. You do not
need to type 'http' or anything other than the IP address.
At the log-in screen, enter the user name (siteadmin) and password. The About
screen should appear as shown below.
Click System Control to display the following screen:
Cenova Image Analytics Server 3.0 User Guide
Chapter 3: System Operation
Page 23